Torque Unit Converter

This page converts a torque from one unit into another. Every value passes through the newton metre, the SI unit torque is held in, and torque stays torque: a unit only converts inside its own dimension.

How do you convert torque between newton-metres and pound-feet?

Pick the unit you have, pick the unit you want, and type the value. The page multiplies by the factor between the two and prints the arithmetic under the result, so the answer and the working are the same object.

1. Choose the unit your value is in. This page opens on the newton metre.
2. Choose the unit you want it in. This page opens on the pound-force foot.
3. Type the value. The result and the factor behind it appear together.
4. Read the working. It converts into the newton metre first and out again, which is the same two lines you would write by hand.

Torque Conversion Table

One row per unit this page offers, each measured against the newton metre. The last column says whether the factor is a definition or a reading of one.

Worked Examples

The question the bank ranked highest for this page, answered with the working.

Where These Factors Come From

Every number above is read from the knowledge base rather than computed for the page. These are the statements it holds for torque.

• One newton metre is one newton applied one metre from the axis. One pound-force foot is 1.3558179483314004 N m and one kilogram-force metre is exactly 9.80665 N m.
• An exact factor is a definition rather than a measurement. 1 in = 25.4 mm and 1 lb = 0.45359237 kg were fixed by the 1959 international yard and pound agreement, so they never gain another digit.
• One joule is one newton metre, the work done moving one newton through one metre. One kilowatt-hour is exactly 3.6 MJ.
• standard acceleration of free fall, value 9.80665
• How this page reports a result result in the target torque unit, plain decimal

SI prefixes on this page

Torque or Energy? Both Are Newton Metres.

A newton metre turns up in two places. A force applied along a distance is energy; a force applied at a distance from an axis is torque. The unit is written the same way and the two quantities are not interchangeable, so this page converts torque into torque only.

The rule behind this factor is the same for every unit - base units and derived units.

Frequently Asked Questions

Related Conversions

• Pressure sits in the same measurement group as torque - the pressure factor table.
• Mass sits in the same measurement group as torque - read a mass in another unit.
• Pace sits in the same measurement group as torque - pace as the reciprocal of speed.
• Speed sits in the same measurement group as torque - convert a speed between kilometres per hour and miles per hour.
• If you are measuring volumetric flow rate rather than torque, scale a flow rate up or down instead.
• If you are measuring power rather than torque, power in watts, horsepower and BTU per hour instead.

The rest of the family sits on another dimension to convert.